![]() |
The French government has announced plans to ban fruits and vegetables from being sold in plastic packaging from January 1, 2022, as part of its Anti-Waste and Circular Economy Law, which aims to create a circular economy by phasing out single-use plastics by 2040 . background The "Anti-Gaspillage ... Read More
|
![]() |
Carbon fiber composite material is a material composed of many carbon fiber tows arranged in a certain direction, and then they are mixed and connected with a matrix such as resin, ceramic, and metal. Compared with traditional metal materials, carbon fiber composite materials have the advantages of ... Read More
|
![]() |
MeetingPack, the biennial event organised by AMPLAS and AINIA that attracts members of the entire packaging value chain, will hold its fifth edition on 20-21 April 2022. The congress will be held at the Valencia Conference Centre with a strict protocol to ensure a safe event. Under the motto Barrier ... Read More
|
![]() |
Will the injection mold be put into production immediately after processing? The answer is of course no, because there is another very important process - mold trial. Before a new mold is injection molded, or when the machine is replaced with other molds, mold trial is an indispensable part, and the ... Read More
|
![]() |
In the injection molding process, the processing speed is very important, because it is not only related to the processing cycle of the product, but also determines the processing cost of the product. The EDM speed refers to the mass and volume of the workpiece being eroded in a certain pulse ... Read More
|
![]() |
There are often many professional terms in injection molds. You don’t need to understand all of these professional terms. If you understand the commonly used professional terms, it will be very helpful for you to open the mold. The commonly used professional terms for injection molds are as follows: ... Read More
|
![]() |
Molds are both familiar and unfamiliar to everyone. Familiarity is because people around you often talk about them, and unfamiliarity is because the classification of molds is not clear. In fact, according to the structure and function of the mold, it is mainly divided into metal molds and plastic ... Read More
|
![]() |
There are many classification methods of injection molds, according to different division basis, usually as follows several categories. (1) According to the category of plastic materials, it is divided into thermoplastic injection mold and thermosetting plastic injection mold. (2) According to the ... Read More
|
![]() |
Do you know what are the five elements of the injection molding process? And what are the applications of the injection molding? If you don’t know about them, following will introduce them for your understanding. What are the five elements of the injection molding process? 1. Temperature: barrel ... Read More
|
![]() |
As we all know, the injection molding has been applied in many industries, such as, the electronics products, medical devices, and so on. Let’s together see the application of the injection mold as follows: Injection mold is an important process equipment for the production of various industrial ... Read More
|