Product Details:
|
Product Name: | 12/24V Home Wind Turbine Generator System 600W Wind Turbine Generators | Keyword: | Wind Turbine Generator |
---|---|---|---|
Shape: | 3 Blades | Color: | Custom |
Size: | Custom | Certification: | ISO9001 |
High Light: | 24 Volt Wind Turbine Generator,Wind Turbine Generator 600W |
12/24V home wind turbine generator system 600W wind turbine generators
Product Features
1. High efficiency, more profit!
This system has our patented Pitch-Controlled wind turbine, which can output 30% more electricity than normal wind turbine. Pitch-Controlled wind turbine has the following advantages,
Model | EQ-600M1 |
Rated power | 600W |
Maximum power | 680W |
Rated voltage | 12/24V |
Start-up wind speed | 2. 5m/s |
Rated wind speed | 10m/s |
Survival wind speed | 55m/s |
Top net weight | 15kg |
Wheel diameter | 1.75m |
Number of blades | 3 |
Blades material | Nylon fiber |
Generator type | Three phase permanent magnet AC synchronous generator |
Magnet material | NdFeB |
Generator case | Casting aluminum alloy |
Control system | Electromagnet/wind wheel yaw |
Speed regulation | Automatically adjust windward direction |
Working temperature | -40°C - 80°C |
Design life | 20 y |
Certificates | CE, IS014001,IS0 9001, TUV |
1.1 Lower start up wind speed!
Pitch controlled wind turbine blades have the best start up angle, can be started up with 2.5m/s wind speed. Best wind power availability when the wind speed is lower then rated wind speed.
1.2 Stable running when wind speed is higher than rated wind speed
When then wind speed is higher than rated wind speed, secondary regulation starts up to make sure system have a stable output power. Lower start up wind speed, then increase the rotating speed, then have a stable output power with a higher wind speed to make sure there is a 30% more electricity output.
2. High performance On-Grid controller and inverter
After years research and practice, we have developed high performance On-Grid controller and inverter, which are more suitable with the Pitch-Controlled wind turbine. Each unit of the system can work perfectly, so the system could output more power, and has a longer service life.
3. Safety, steady, long service life!
3.1 Leading centrifugal pitch controlled technology world-wide.
Exactly regulation: Information input source of pitch controlled mechanism is wind rotor rotating speed. System regulation is more stable, reliable and quick response and so on. Softness regulation: Impact caused by wind speed becoming will be decreased through the pitch controlled mechanism. Regulation soft, failure rate low Longer service life: System adopts mechanical part, floating connection, smaller fraction losses, less failure sources, better environment adaptability, Longer Service life.
3.2 ASP System (Automatic safety protection system)
ASP system, our patent product is unique protection system in China. It can control the wind turbine to run or stop by testing the environment wind speed and system working voltage. When the environment wind speed or system voltage is over the set value, it will shut up the wind turbine. When the wind speed is lower than 25m/s, it will release the brake system, wind turbine restart to work. ASP makes nobody guard come true.
4. Low Working Noise!
Excellent permanent magnet power technology and aerodynamic characteristics of the blades, lower the noise level of the wind turbine. The noise level is less than 65dB
5. Easy installation
5.1 Easy to installation without any heavy equipment likes crane, save installation cost.
5.2 Carry and installation are not limited by landform, especially for mountain area and island 5.3 Tilt-up tower, easy to install and maintenance.
FAQ
1. Why the shipping cost changes so differently?
Actually, the shipping cost according to the quantity, if you need 10 pcs, the package is totally different with the package of 100 pcs. that is why the shipping cost is different.
2. May I start to test the sample at a very small quantity?
Such as one pc ? Sure, you can. We fully understand that at the very beginning, you need to test the quality, also the market, so one pc of sample is acceptable. but please be noted that: if the quantity is very small, the shipping cost may very expensive. because it is not suitable for the shipping by Sea, and by Express, the shipping cost may expensive.
3. How long about the lead time after I paid ?
If you paid online, after we received your payment, we would arrange the package and delivery according to our production line. Normally if the quantity less than 200 pcs, the lead time would within 5 days, if there is the holiday or the hot selling season, such as the Black Friday and Double 11, the lead time may be delay. and we would notify you before the delivery.
4. If I did not receive the parcel, what should I do ?
Sometimes, if the parcel is really lost during the delivery, we would arrange the re-send service. to make all the customers have a good buying experience.
For injection molding, the products will be sent for 15 days. And we support OEM and ODM.
Contact Person: admin
Tel: +8618529472802