Product Details:
|
Product Name: | Upe | Length: | Customized |
---|---|---|---|
Weight: | Customized | Nylon Board Application: | High Hardness, Low Friction |
Nylon Sample: | YES | Nylon Stability: | Against Organic Solvents And Fuels |
Nylon MOQ: | 1 Pc | Nylon Board Brand: | Enqi |
High Light: | black white polyethylene sheet,white polyethylene sheet board,black hdpe sheet |
Anti-static UPE board black and white blue green wear-resistant UPE board General Engineering Plastics
HDPE is a highly crystalline, non-polar thermoplastic resin. The appearance of the original HDPE is milky white, and the thin section is translucent to a certain extent. PE has excellent resistance to most domestic and industrial chemicals. Certain types of chemicals will produce chemical corrosion, such as corrosive oxidants (concentrated nitric acid), aromatic hydrocarbons (xylene) and halogenated hydrocarbons
(Carbon tetrachloride). The polymer is non-hygroscopic and has good water vapor resistance, and can be used for packaging purposes. HDPE has good electrical properties, especially the high dielectric strength of the insulation, making it very suitable for wires and cables. Medium to high molecular weight grades have excellent impact resistance, even at room temperature and even at low temperatures. The unique characteristics of various grades of HDPE are the proper combination of four basic variables: density, molecular weight, molecular weight distribution and additives. Different catalysts are used to produce customized polymers with special properties. The combination of these variables produces HDPE grades for different purposes; achieving the best balance in performance.
Property | Item No. | Unit | Value | |
Mechanical Properties | 1 | Density | g/cm3 | 0.94-0.96 |
2 | average molecular weight | g/mol | 9.2X106 | |
3 | Tensile strength (23℃ in air) | MPa | 22 | |
4 | Breaking strength | MPa | 42 | |
5 | Tensile strain at break | % | 600 | |
6 | Charpy impact strength (notched) | mJ/mm2 | No break | |
7 | Ball indentation hardness | N/mm2 | 42 | |
8 | Shore D hardness | -- | D65 | |
9 | Abrading(sand slurry experiment) | -- | 100 | |
10 | Coefficient of Friction | -- | 0.09~0.1 |
Contact Person: admin
Tel: +8618529472802