|
Product Details:
|
| Model: | HDPE Plastic Cutting Nylon Board | Whether To Import: | No |
|---|---|---|---|
| Length: | Customized | Nylon Stability: | Against Organic Solvents And Fuels |
| Nylon MOQ: | 1 Pc | Nylon Board Brand: | Enqi |
| Nylon Color: | Black White Blue Green Etc. | Black White Blue Green Etc.: | Black White Blue Green Etc. |
Plastic nylon rod high temperature resistant engineering plastic black blue round cast nylo General Engineering Plan rod
Nylon plates are divided into extrusion and casting according to different production processes. Extruded nylon sheet 1, nylon 6 (white): This material has the most superior comprehensive properties, including mechanical strength, stiffness, toughness, mechanical shock absorption and wear resistance. These characteristics, coupled with good electrical insulation and chemical resistance, make nylon 6 a "universal grade" material for the manufacture of mechanical structural parts and maintainable parts. 2. Nylon 66 (cream color): Compared with nylon 6, its mechanical strength, stiffness, heat resistance, wear resistance, and creep resistance are better, but the impact strength and mechanical shock absorption performance are reduced, which is very suitable for automatic lathes. Machining. 3. Nylon 4.6 (red-brown): Compared with ordinary nylon, nylon 4.6 is characterized by strong rigid preservation, good creep resistance, and more heat-resistant aging in a wider temperature range. Therefore, nylon 4.6 is used for Nylon 6, nylon 66, POM and PET in the stiffness, creep resistance, heat aging, fatigue strength and wear resistance cannot meet the requirements of the "higher temperature range" (80-℃) 4. Nylon 66+ (Black): Compared with pure nylon 66, this nylon is reinforced with 30% glass fiber, and its heat resistance, strength and rigidity. Creep resistance, dimensional stability, wear resistance and other properties have been improved, and its maximum allowable use temperature is higher.
| Property | Item No | Unit | MC Nylon (Natural) | Oil Nylon+Carbon (Black) | Oil Nylon (Green) | MC901 (Blue) | MC Nylon+MSO2 (Light black) |
| 1 | Density | g/cm3 | 1.15 | 1.15 | 1.135 | 1.15 | 1.16 |
| 2 | Water absorption (23℃ in air) | ％ | 1.8-2.0 | 1.8-2.0 | 2 | 2.3 | 2.4 |
| 3 | Tensile strength | MPa | 89 | 75.3 | 70 | 81 | 78 |
| 4 | Tensile strain at break | ％ | 29 | 22.7 | 25 | 35 | 25 |
| 5 | Compressive stress(at 2%nominal strain) | MPa | 51 | 51 | 43 | 47 | 49 |
| 6 | Charpy impact strength (unnotched) | KJ/m2 | No break | No break | ≥50 | No BK | No break |
| 7 | Charpy impact strength (notched) | KJ/m2 | ≥5.7 | ≥6.4 | 4 | 3.5 | 3.5 |
| 8 | Tensile modulus of elasticity | MPa | 3190 | 3130 | 3000 | 3200 | 3300 |
| 9 | Ball indentation hardness | N2 | 164 | 150 | 145 | 160 | 160 |
| 10 | Rockwell hardness | -- | M88 | M87 | M82 | M85 | M84 |
Contact Person: admin
Tel: +8618529472802
