|
Product Details:
|
| Name: | 5mm Plastic PAI Rod Polyamide Imide High Performance Corrosion Resistant | Color: | Yellow, White, Black, Green, Blue ,etc... |
|---|---|---|---|
| Density: | 1-200mm | Other Material: | PAI |
| Size: | 500*500mm , 600*1000mm Customizable | Certificate:: | ISO9001 |
| Application: | General Machinery, Electronics Industry, Etc. | Quality Warranty:: | Yes |
| High Light: | 5mm Plastics PAI Rod,5mm PAI Rod High Performance,5mm PAI Rod Polyamide Imides |
||
5mm Plastic PAI Rod Polyamide Imide High Performance Corrosion Resistant
PAI has excellent mechanical properties, electrical properties and high-temperature resistance, since its strength is one of the high-end varieties of commercial plastics. It is resistant to nuclear radiation, ultraviolet light radiation, and has excellent chemical resistance. It can withstand various organic solvents including chlorinated hydrocarbons, but its resistance to strong alkalis, water vapor and oxidants is slightly worse. Its pure resin and spicy fiber reinforced types It is widely used in electronics, electric power and aerospace industry. The polyphthalimide composite material reinforced with continuous carbon fiber has better mechanical properties, toughness and heat resistance. The disadvantage is that the melting is too wide, and the molding cycle is long.
(PAI + graphite + PTFE) (black)
The addition of graphite and PTFE provides higher wear resistance and lower coefficient of friction compared to the unfilled grade as well as little or no stick-slip in use. This grade excels in severe wear applications such as non-lubricated bearings, seals, bearings cages and reciprocating compressor parts. Guangzhou Engineering Plastics Industries (Group) Company, can supply all the size of PAI4301 Sheets and rods, at the same time we also supply the PAI4301 Precision Parts.
|
Property |
Item No. |
Unit |
TORLON®4203PAI |
TORLON®4301PAI |
TORLON® 5530PAI |
| 1 |
Density |
g/cm3 |
1.41 | 1.45 | 1.61 |
| 2 |
Water absorption (223℃ in air) |
％ |
2.5 | 1.9 | 1.7 |
| 3 |
Tensile strength |
MPa |
120 | 80 | 95 |
| 4 |
Tensile strain at break |
％ |
10 | 5 | 3 |
| 5 |
Compressive stress(at 2%nominal strain) |
MPa |
53 | 58 | -- |
| 6 |
Charpy impact strength (unnotched) |
KJ/m2 |
No break |
-- | -- |
| 7 |
Charpy impact strength (notched) |
KJ/m2 |
10 | 4 | 3.5 |
| 8 |
Tensile modulus of elasticity |
MPa |
4500 | 5800 | 6000 |
| 9 |
Ball indentation hardness |
N/mm2 |
200 |
200 |
-- |
| 10 |
Rockwell hardness |
-- | E79 | M105 | E77 |
Contact Person: admin
Tel: +8618529472802
